Product Description

 

 

The inner teeth are fixed on the outer teeth through the fabric tape. When the slider closes up the two fabric tapes, the fabric tape with elasticity between the outer teeth will be compressed into the shape, as shown in the figure, and the double sealing status will be formed.

 

Application:

• Industries (inflatable bouncy castles, Tents, flexible covers, petrol tanks, protection and Storage bags and bagpipes etc…)

 

• Immersion suits

 

• Protective work wear

 

• Chemical protection suits

 

 

 

Items	Unit	No.8 CR	No.8 TPU/PVC
Width Of The Chain	mm	7.0	7.0
Total Width Of The Zipper	mm	70	70
Chain Crosswise Strength	N/in	Min:200	180
Top Stop Holding Strength	N	Min:175	150
Combined Strength Of The Slider	N	Min:450	450
Air Pressure For Tightness	kpa	Min:100	30
Smoothness	N	Max:50	55
Reciprocation Test	Cycles	Min:800	300

Installation Requirements

2. Apply adhesion or vulcanization to the connection between the sealed zipper and the product. The surface should be flat, smooth, wrinkle-free and bubble-free to ensure a firm connection.

Maintenance Instructions

 

2. Apply TM wax to the outer teeth of the zipper. Take care not to apply too much wax.

4. Store the clothes in the place without dust to prevent the accumulation of dust on the zipper. Hang or fold the clothes and take care not to fold the zipper.

 

-Surface coating: Chloroprene rubber adhesive . PVC welding is not feasible currently as chemical reaction will easily take place between the PVC and the tape, which will affect the overall performance of the zipper.

 

 

Payment Terms︰ TT, LC, Paypal, western union

Product Image